High Pressure Cleaning Service Melbourne

What Our Customers Say

Real feedback from real Melbourne customers, not handpicked quotes. Read Our Customer Reviews.

Outdoor Surfaces Take a Different Kind of Beating

Concrete, pavers, brick and stone are exposed to weather, foot traffic, vehicles, and whatever nature leaves behind, moss, algae, bird droppings, tyre marks and general grime that builds up gradually enough that most people don’t notice how bad it’s gotten until it’s cleaned.

Crystal Clean Carpet & Tiles has been restoring outdoor surfaces across Melbourne properties since 2007, matching pressure and technique to the specific surface rather than blasting everything the same way.

    What Surfaces Can Be High Pressure Cleaned?

    We regularly clean concrete driveways, paved courtyards, brick paths, natural stone, and pool surrounds. Each surface has a different tolerance for pressure, concrete can generally handle a stronger clean, while softer or older pavers, sandstone and some brick need a gentler approach to avoid pitting or eroding the surface. Identifying the right pressure for your specific surface is part of the job, not an afterthought.

    How We Pressure Clean Your Property

    Getting the result right depends on matching pressure, product and technique to the surface and the contaminant, rather than one setting for everything.

    01

    Initial inspection.

    We inspect the area to be cleaned, identify the surface type (concrete, pavers, brick, stone or similar), check for oil stains, mould, algae, moss, rust, chewing gum or other contaminants, and assess drainage and the surrounding area.

    02

    Prepare the area

    Furniture, pots, bins and loose debris are removed, leaves and dirt are swept or blown away, nearby plants, electrical outlets, windows and sensitive surfaces are protected, and safety signs or barriers are set up if required.

    03

    Pre-treatment

    An appropriate cleaning solution is applied for the specific surface and contaminant, given time to dwell, and heavily soiled areas are agitated if required.

    04

    High pressure cleaning

    A truckmounted or portable pressure cleaning system is used depending on site access and job requirements, with the pressure setting adjusted specifically for the surface being cleaned.

    05

    Post-clean inspection

    We inspect the cleaned area, re-clean any heavily soiled sections if needed, and explain clearly if any staining or surface damage was already permanent and could not be removed.

    See the Difference for Yourself

    A closer look at real carpet steam cleaning jobs completed across Melbourne homes, showing the same fibres before treatment and after hot water extraction.

    What Kind of Stains Can Be Removed?

    Oil and grease marks, mould, algae, moss, rust staining and chewing gum are among the most common issues we treat on driveways and outdoor areas. Results depend on how long the contaminant has been there and what it has soaked into, oil that has sat on porous concrete for years, for example, may lighten significantly rather than disappear completely. Our technician will give you an honest read on what’s achievable once they’ve assessed the surface.

    Will Pressure Cleaning Damage My Pavers or Concrete?

    Not when the pressure and technique are matched correctly to the surface, which is exactly why our inspection step comes before any cleaning begins. Older, softer or more porous surfaces are cleaned at a lower pressure to avoid pitting, eroding jointing sand, or stripping protective coatings, while harder surfaces like dense concrete can generally handle a more thorough clean.

    Why Choose Crystal Clean Carpet & Tiles?

    01

    We bring the same surface-first approach outdoors that Serage Fikak built the business on indoors back in 2007, assess first, then match the method to what’s actually there.

    02

    We hold $20,000,000 in public liability insurance through Allianz and were awarded the Word of Mouth Service Award every year from 2014 to 2018.

    How Much Does High Pressure Cleaning Cost in Melbourne?

    High pressure cleaning costs depend on the size of the area, the surface type, and how much build-up needs to be removed. A single entryway is a very different job to a full driveway or courtyard covered in years of grime, so we assess before quoting rather than charging a flat rate, no obligation, no guesswork.

    Get an honest, accurate price for your home.

    Frequently Asked Questions

    Is there a best time of year for high pressure cleaning?

    Any time of year works, though many customers prefer cleaning before winter to clear moss and algae before wetter months make it worse, or in spring to freshen outdoor areas ahead of warmer weather.

    Not necessarily, as long as we have clear access to the area being cleaned and any gates or side access are unlocked. We can discuss access arrangements when you book.

    Most surfaces are dry within a few hours in good weather, though this depends on the surface type, temperature and airflow. We’ll let you know what to expect on the day.

     Pressure cleaning removes surface growth and grime, but it won’t prevent weeds from returning between paver joints over time. This is a separate issue to general surface cleaning, and we’re happy to discuss options if it’s a recurring problem for your property.

    Yes, our high pressure cleaning work is backed by our 100% Satisfaction Guarantee.

    Related Cleaning Services

    If you’re refreshing the outside of your property, these are worth considering too.

    Vinyl Floor Cleaning and Sealing

    Deep cleaning and resealing to restore shine and protect vinyl flooring long-term.

    Tile & Grout Cleaning

    Hot water extraction that lifts embedded grime out of tile and grout lines.

    Water Damage Restoration

    Structural drying and restoration for homes affected by leaks or flooding.

    Book Your High Pressure Clean Today